The use of water storage is as old as human civilization. At present water storage tanks are the parts of every household may it be domestic or commercial one. They are available in different sizes, shapes and types such as loft water tanks, plastic water tanks, steel water tanks etc. So, it is now essential to follow proper water storage practices to lead a healthy life for the society. Inner layer is made from food grade material which makes the water storage tanks completely safe for consumption.
Product Details:
Storage Capacity 200 to 10000 Litres
Layer Type 3 to 7
Brand RONIX
Material LLDPE
Color Black, White, Blue, Green, Yellow
As worldwide water consumption increases, drinking water is becoming ever more scarce and more valuable.
Statutory requirements and increasing health awareness among the general public are making us rethink the way we use water. With this in mind, we produce tanks and components for water storage, water treatment and drainage.
Rotational molding, rotomolding, or rotocasting is a production process to form hollow parts of limitless size. This is a cost-effective method to produce large plastic parts. Resins are added into a mold that’s heated and rotated slowly, both vertically and horizontally. The simultaneous heating and rotation distributes and fuses the resin on the inner surfaces of the mold. The result is a product that contains seamless parts with a uniform wall thickness with more material in corners to absorb shocks and stresses where they occur most.What is new in rotational molding in recent years relates not to plastisols but to powdered resins of about 35 mesh which have triggered improvements in equipment design and the overall technology, making this technique among the major plastics processing methods of today.
In 1961, the first polyolefin powder, a low-density polyethylene, was publicly demonstrated to the rotational molding industry. Polyetheylenes remain one of the most popular materials for rotomolding, because of the process ability, broad range of properties, and low cost. Major thermoplastic raw material suppliers have investigated specially formulated powders for rotational molding, including polypropylene, nylons, polycarbonate, rigid polyvinyl chloride and others. These powders can be foamed or reinforced with fiberglass. In addition to the raw material suppliers, many rotational molders also have used custom grinding services or have their own in-plant grinding capabilities which have also enlarged the material selection for this process.
Rotational molding is incredibly versatile allowing for a variety of shapes and sizes to be created that are typically difficult to produce by any other method.
• Lightweight
• Custom-Molded
• Cost-Effective
• Durable/Long-Lasting
• Corrosion-Proof
Linear low-density polyethylene (LLDPE) is a substantially linear polymer with significant numbers of short branches, commonly made by copolymerization of ethylene with longer-chain olefins.
Water Tank
Water Storage Tank
Double Layer :
Triple Layer : When LLDPE water storage tanks are installed on roof tops, the stored water in it gets excessively heated during summer making it inconvenient to use. To overcome this problem, Ronix introduces foam filled three layered water storage tanks. Foam filled between two linear layer on both outside & inside prevents transmission of heat being a non-conductor and thereby ensuring a variation in the stored water temperature from that of the atmosphere. It delivers soothingly cool water in hot summer & pleasantly warm water in cold winter. Moreover, the unique LLDPE tank has an aesthetically superior external marble finish which matches beautifully to the elevation of any building.
Four Layer : Ronix new product in this segment. Foam filled between two linear layer on both outside & inside prevents transmission of heat being a non-conductor and thereby ensuring a variation in the stored water temperature from that of the atmosphere. It delivers soothingly cool water in hot summer & pleasantly warm water in cold winter. Moreover, the unique LLDPE tank has an aesthetically superior external marble finish which matches beautifully to the elevation of any building.
CAPACITY | OVERALL HEIGHT | OVERALL DIAMETER | MANHOLE SIZE |
(LITER) | (INCH) | (INCH) | (INCH) |
200 | 25 | 26 | 11 |
300 | 34 | 28 | 11 |
400 | 35 | 30 | 11 |
500 | 37 | 34 | 16 |
750 | 43 | 37 | 16 |
1000 | 48 | 41 | 16 |
1500 | 49 | 56 | 16 |
2000 | 63 | 56 | 16 |
2500 | 65 | 56 | 16 |
3000 | 66 | 64 | 16 |
4000 | 86 | 64 | 19 |
5000 | 87 | 68 | 19 |
7500 | 121 | 68 | 19 |
10000 | 125 | 80 | 19 |
CAPACITY | LENGTH | HEIGHT | WIDTH |
(LITER) | (INCH) | (INCH) | (INCH) |
225 | 38 | 29 | 14 |
275 | 45 | 29 | 14 |
375 | 47 | 36 | 14 |
500 | 49 | 37 | 20 |
CAPACITY | HEIGH | OD |
(LITER) | (INCH) | (INCH) |
100 | 26 | 20 |
Roto Moulded Water storage tanks are a substitute of Concrete/ GI tanks on the roof of the house and are also used for indoor water storage purpose in house/hotels/hospitals etc. They are very cost effective compared to others, its substitutes and has very strong & steady properties.
Features :
Roto Moulded Water Storage Tank is manufactured in India mostly by Rock & Roll process. In this process only one tank is manufactured at a time and only one mould can be fitted with the machine. Hence there is substantial loss of time in changing of the mould for production of next one. Hence the rate of production is low. This creates loss of labour, loss of fuel etc.
To save time, labour & fuel we have installed 3 arm Roto Molding plant to manufacture upto 10000 liter of Water Tank where a single arm can carry two moulds upto 750 liter.
Ronix Polymer (P) Ltd
167, Old China Bazar Street
Kolkata-700001
+91 033 22421895
info@.ronixpolymer.in